How to Make an Easy Slipcover for a Stylish Chair Makeover

Making DIY slip covers for your armchairs is a wonderful way to completely change their look without buying a whole new set of chairs. With these step-by-step instructions, I’m going to teach you how to make your own custom slipcover pattern, cut your fabric pieces, and sew your own easy & beautiful chair slipcovers!

Disclosure: This post is sponsored by The Brick. As always, all of the opinions here are my own.

If you own a high-quality chair or set of chairs that you love, sewing slipcovers for them is a wonderful way to give them a new look on a budget. I adore my pair of Wynn Accent Chairs from The Brick because they have gorgeous, classic lines and I think their quality is amazing! They’re firm but comfortable with their high-density foam cushions, and the chairs are nice and deep so that you can sink back and relax.

While I love the beautiful, neutral paisley print of my chairs, I thought they’d be the perfect candidates to sew slipcovers for. Their original pattern limits the other patterns I can add to our living room, and I’ve always enjoyed the fresh & airy look of white slipcovers for the summer months. So, I enlisted my mom to help me get started on some DIY slipcovers for these gorgeous chairs.

There are other reasons to cover a chair too! Maybe you love your chair pattern and cannot even think about covering it. But ask yourself, “How do you cover a chair for moving?” Whether you’re moving a chair to another floor or to a different house altogether, covering it with a slipcover is an excellent way to protect it from bumps and snags.

How do you make a simple slipcover for a chair?

Choose & Pre-Wash the Fabric

• You can use all sorts of fabric types for slipcovers, but picking something washable is a great idea. Using an old sheet or some inexpensive muslin is a great way to create your initial pattern. Then you don’t have to gamble with your actual slipcover fabric as you create your pattern.
• Make sure to pre-wash your fabric if you’re planning to wash the final slipcover. My mom recommends washing it at the hottest setting so that you shrink it thoroughly first. I chose a white cotton decor fabric for my slipcovers.

How do you measure a chair for slipcovers?

At this point you might be wondering, “OK, but how many yards of fabric do I need to cover a chair”? The answer is that every chair is different and you just have to take some measurements. I recommend using an old sheet as a pattern to determine how much fabric you need and then going from there.

• Remove the chair cushion. We’ll get to that later. Use your old sheet or muslin fabric (or your actual fabric if you’re feeling bold!) and start laying it over sections of your chair – the arms, the back, the seat, etc.
• Measure and cut rectangles a few inches larger than each piece. It’s always better to cut the rough pieces out larger first. You can make them smaller later, but you can’t make smaller pieces larger!
• NOTE: You may have to divide the back piece in half and add a zipper or ties in order for the slipcover to fit snugly over your chair. In my case, I made sure my slipcover was wide enough to slip over the entire chair without a closure.
• For my chairs, we cut pieces that were large enough to graze the floor. This way I’d have flexibility with the hem length of the slipcovers.

• NOTE: Add some extra length to your fabric where your chair has deep crevices. My Mom recommends having your fabric at least 2 inches longer at these points so that your finished slipcover can be tucked deep into these crevices to create a more fitted look in the end.

• Next, put each fabric piece in place one at a time, pin it to the corners of your chair with stick pins, and mark the seams with a washable pencil. This will help you create a pattern piece that matches the curves of your chair perfectly.

Cut your fabric pieces

• Now, it’s time to cut your fabric pieces! Before you cut, make sure to add a 3/4″ seam allowance all the way around the pieces that you’ve traced. You CAN use a 1/2″ seam allowance to sew your slipcover, but an extra 1/4″ will help the slipcover fit nicely over your chair. Don’t forget that your chair is symmetrical. You can cut out one set of arm pieces and then mirror them as a pattern for the other arm.
• NOTE: If you’re using a cheap sheet or muslin to create your slipcover pattern, now it’s time to use it to cut your good fabric! If you’ve been working directly with your finished fabric, STOP and trace all of your pieces onto paper before you sew your slipcover. You’ll be happy you made a copy of your pattern when you want to sew new slipcovers in the future!

Sew the Slipcover

• Using a standard sewing machine and a 1/2″ seam allowance, start sewing your slipcover together piece by piece. I started sewing my seat piece onto the bottom fronts of the arms and went from there.

• After sewing each piece, place the slipcover on your chair inside out. This will work in the end because of the chair’s symmetry. Now, make any adjustments by pinning things in place with stick pins and making marks with a pencil.

• You’ll be putting the slipcover off and on again a lot, but this will help achieve a nice fit.
• If you make any alterations to your pattern as you sew, make a note of those so that you can adjust your pattern for the next time.
• Finish your seams with a zig-zag or serger (interlock) stitch. This will help prolong the life of your slipcover as you wash it.
• Hem the bottom of the slipcover by pressing it under twice at the length you desire and stitching the hem in place.
• I didn’t add any piping or top stitching to my slipcovers to make them simple to sew. If you want, you could add those details now for a more traditional look.

Sew the Cushion Cover

• Use your actual seat cushion cover as a pattern to create this part of your slipcover. Measure it and then trace it onto your fabric, remembering to add the 3/4″ seam allowance.

• Create a zipper opening by pressing a 3/4″ seam allowance on one side of the two strips of your cushion’s side piece. Then, pin and sew a zipper in the middle.

• Pin the cushion side pieces to the cushion top & bottom pieces and sew them all together. Turn everything right side out.
• Put the original foam from the cushion inside your new cushion cover.

Watch my YouTube video below for the step-by-step instructions

Now it’s time to put your new slipcover on your chair!

Turn your new slipcover right side out and pull it over your armchair. Line up the seams of the slipcover with the seams of your chair. Next, smooth and tuck any excess fabric into the chair’s crevices to create a fitted look.

Pop on your newly covered cushion, and you’re all set! You have a chair that looks brand new!

I think our living room looks completely different with the slipcovers on our beloved & comfy Wynn Chairs! I really like the casual, relaxed look of the softly draping white covers, and the fact that I can pull them off and wash them is a huge bonus.

The slipcovers also allow me to play with adding different patterns to my accessories. I love how our living room is transformed into a more relaxed, boho look for summer with some DIY throw pillows, lots of greenery, and sea glass accents.

Also featured here in our living room: the Luda Accent Table, Ahmar Area Rug, Meredith Velvet Sofa, Keir Coffee Table & the sea glass candle sticks on the mantel are from The Brick in-store. I think it’s so neat how all of these pieces can work with both a French Country style (like in my Spring home tour) or this more boho look for summer.

I love that I was able to give these comfy and classic chairs a whole new look with a little fabric and a whole lot of DIY!

Now tell me: Would you ever sew custom slipcovers?

Pin Me!